CT-V900-A
2-Door Controller
- Control 2 doors (Reader In / REX Out) or 1 Door
(Reader In / Reader Out)
- Add up to 6 more doors to the CT-V900-A using
the CA-A470-A expansion module
- 10,920 on-board card database
- 256 Schedules
- 256 Access Levels
- 2048 Event Buffer
- 16 on-board inputs (*using ATZ 2R/3R)
- 2 on-board 12 Vdc or 24 Vdc field-selectable
lock outputs
- 2 on-board Form C dry contact relay outputs
(N/O - N/C)
- Fully distributed database architecture (access decisions
made locally)
- Flash firmware - Upload firmware via the computer
- E-Bus technology add-on hardware modules can be up
to 1220m (4000ft) away from the CT-V900-A
- 2.5A switching power supply
- Supports common Wiegand, Track 2 ABA (mag stripe)
and BCD (keypad) formats
- Easy maintenance with snap-off terminal blocks
- Battery backup functionality (2 x 12V 7AH
gel-type batteries)
- Lithium battery protection in case of complete power
failure
- Plug and play technology
- RS-485 E-Bus for expansion modules
- Connect modules up to 1220m (4000ft) away
from the controller
- RS-232/485 port enabling communication
with the software
- Controlled elevators: 2 cars/cabs with 64 floors
per car/cab
- Schedules per floor: Yes
- Floor groups: 128
- Requirements: Standard, Professional or Enterprise
edition software
- Reader Inputs/Ports: 2
- Keypad Inputs/Ports: 2
- Multi-purpose Inputs: 16 (using ATZ 2R/3R)
- 12/24Vdc Lock outputs: 2
- Relays: 2 Form C Dry Contact 5A/30Vdc N.C/N.O
- Reader Outputs: Six 25mA Open collector outputs
(Red/Green LEDs, Buzzer)
- Power input: 24Vac, 75VA or higher, 50/60Hz transformer
- Supply current: 2.5A maximum
- Battery capacity: Two 12Vdc, 7Ah, acid/lead gel
cell batteries
- Auxiliary outputs: 2.5A (24Vdc), 1A (12Vdc & 5Vdc)
fuseless protection
- AC protection: 5A fuse
- Battery reversal: 7A fuse
2-DOOR CONTROLLER WITH BOX
Dimensions
| Width (mm): | 330 |
|---|---|
| Height (mm): | 390 |
| Depth (mm): | 100 |
Product Sheet(s):
 3522 kB | |
|
3499 kB |
